Floor finishes

Designed and conceived for constant and heavy loads – yet extremely hygienic and non-slip!

The thickness and composition of the cold room flooring is always based on the required load values, hygiene requirements, process conditions and legal regulations. Whichever choice you make, all our Pfeuffer floors have one thing in common: they are designed for heavy, long-term use. Depending on the requirements, the floor elements have a stainless steel top layer of 0.7 mm to 3.0 mm. A sturdy, thick pressure distribution plate incorporated into the floor element protects the PUR foam from deformation and damage.

Non-slip surface

Depending on the location, legislation requires high to very high slip resistance in the cold room. The R11 / R12 / R13 requirements can all be met.

Floor finishes, loads

Our Pfeuffer standard stainless steel floor is suitable for all walk-in cold storage rooms that are used with crockery and serving trolleys and a maximum total weight of 100 kg. If the room is to be loaded or driven on with heavy loads, particularly robust constructions with sheet thicknesses of 2.0 mm to 3.0 mm are possible. Depending on the area of application (or high humidity / alternating temperatures from -55°C to +35°C), the floor panel can also be designed as a trough. To guarantee a joint-free floor, we can weld the panel joint on site for the reinforced floor versions on request.

Coldrooms “without” floor with connection profile

For coldrooms without a floor, the wall elements are attached to the on-site floors with a U-profile made of sheet steel.

Freeze protection

To prevent damage, freezer cells that are operated permanently at sub-zero temperatures must be protected against frost and moisture. Special plastic rings under the bottom of the cell provide a remedy, allowing continuous ventilation. Alternatively, the use of an electric anti-freeze heater is ideal for protecting the cell.

VAKompakt cell base

If the construction site requires very thin floor heights with consistently high insulating properties, the proven VA compact floor elements are suitable. With a maximum construction height of 60 mm, they enable the realization of deep-freeze rooms with a room temperature of -25°C.